Prouduct

Laboratory Lubricants Oil Rotary Oxygen Bomb Oxidation Stability Testing Equipment

The KR0193C fully automatic rotary oxygen bomb tester is designed and manufactured according to the standard ASTM D2272-2009 "Lubricating Oil Oxidation Stability Test" metal bath standard. It is suitable for assessing the oxidation stability of new and used turbine oils with the same composition (base oils and additives).

  • Model: KR0193C

Laboratory Lubricants Oil Rotary Oxygen Bomb Oxidation Stability Testing Equipment with Metal Bath


The KR0193C fully automatic rotary oxygen bomb tester is designed and manufactured according to the standard ASTM D2272-2009 "Lubricating Oil Oxidation Stability Test" metal bath standard. It is suitable for assessing the oxidation stability of new and used turbine oils with the same composition (base oils and additives). It can also be used to evaluate new mineral insulating oils containing 2,6-di-tert-butyl-p-cresol as a rapid assessment method for its oxidation stability. The test results were used to test new mineral insulating oils containing 2,6-di-tert-butyl-p-cresol or 2,6-di-tert-butylphenol or both, with continuous control of performance for each batch of oil.

Kolery Analysis Instruments

Performance characteristics


l. Used in new oil, in-use oil, steam turbine oil, lubricating oil, insulating oil and automotive gasoline engine oil.

2. The metal measuring cell reduces the unpleasant odor emitted by the medium oil during the test, and eliminates the dangers that may occur due to the long test time.

3. Independent operation design, the test process has the ability to quickly turn around, which can greatly improve work efficiency.

4. The design volume is small, and the metal bath is free of liquid medium.

5. The ventilation is simple, no need to be placed in the fume hood, and the exhaust gas and odor can be easily discharged through the plastic pipe.

6. Control the operation of up to 2 sets of tests simultaneously or separately

7. Sample temperature sensor assembly: The temperature of the sample can be measured during the test

8. Instrument display: 7-inch color touch screen, beautiful interface, easy to operate

9. High degree of automation: automatic constant temperature, automatic oxygen injection, automatic judgment of leakage, automatic recording of test data and real-time display of curves, automatic determination of test inflection points, cutting off heating after the end of automatic test.

10. Micro printer: Panel type thermal.




Technical Parameters:

Power supply: AC220V ± 10%

Heating tube power: 2500W

Pressure sensor range: 0 ~ 1.6MPa, accuracy: ± 2 ‰.

Temperature control range: room temperature ~ 200.0 °C

The temperature control point can be set:140.0 °C, 150.0 °C.

Temperature control accuracy: ±0.1 °C

Rotating mechanism speed: 100±5r/min

The angle between the oxygen bomb and the horizontal plane: 30°

Instrument size:600mm*400mm*400mm (length, width and height)

Weight: 30kg