This KR-605 karl fischer water content tester adopts the global recognized classical moisture testing method - Karl Fischer Coulometric Method which is the most accurate method with low cost.
This KR-605 Karl fischer water content in oil analysis equipment adopts the global recognized classical moisture testing method - Karl Fischer Coulometric Method which is the most accurate method with low cost. With the universal standard and analyzing method, it can quickly analyze the moisture content in liquid, solid and gas and directly display testing results within 60 seconds, with testing range from 0.0001%(1ppm) to 100%. Therefore, this testing method has been widely used in institutions and enterprises of petroleum, chemical industry, power, pharmaceuticals, pesticide, railways, research, etc.
The whole testing process is automatically controlled by this tester itself. Its auto-stirring and analyzing would be finished within 60seconds, and results would be displayed directly. Totally closed titration system avoids damage to operator from reagent. Equipped with 500ml Karl Fischer Reagent, which could test about 1000 times sample continuously, completely avoiding big deviations of other moisture testing method and thus improving quality index of products.
| Liquid: Chemical Industry:alcohols, ethers, esters, alkenes, benzenes, amines, organic solvents, phenols and other organic products applicable to Karl Fischer Method for determination Petroleum and Power Industry:Insulation Oil, Transformer Oil, Turbine Oil, etc. Pharmaceutical Industry :medicine materials Pesticide Field:emulsifier Other Industry:electrolyte of lithium battery |
Solid: Various mineral salt, citric acid, explosives, paraffin and other solids with good solubility |
Gas: Natural gas, liquefied gas, Freon, butadiene, chloromethane, etc. |
1. Electrolytic speed: microprocessors control electrolysis.
2. 6-inch (320X240 lattice) touch screen LCD display in English. Function of reagent failure prompt, extending the service time of it.
3. Completely closed titration system avoids direct touch between people and the reagent as well as the influence of environmental humidity.
4. The outer shell is made of high-quality cold-rolled steel plate with electrostatic sprayed surface, anti-corrosion and easy to clean.
5. Can connect with analytical balance (optional) to do the data communication and process.
6. Auto-control electrolysis current within 430mA ensures high sensitivity and fast analyzing speed.
7. Preinstalled with cubature (including 3 pieces of formula), statistical calculation (including average calculation, standard deviation calculation and rate of change calculation) and elementary arithmetic, with the advantages of auto-analysis and calculation.
8. Automatically tests the sample, analyzes and displays results, and calculates the average value of several times of test.
9. Powerful storage function, the measurement results automatically stored 1000, easy to check historical records.
10. Automatically calculates and prints the following content: ug / ppm / percentage / mg/L / sample number / experimenter / testing date, etc.
11. Network management available by connection with laptop or computer communications through USB or RS232 interface.
12. Multilanguage display available. The program of tester can be upgraded accordingly if related national standard is revised.
GB/T 6283-2008 Determination of moisture content in chemical products - Karl Fischer method.
ASTM E1064-2008 Karl Fischer Coulometric Titration for Determination of Water Content in Organic Liquids.
GB/T 7600-1987 Determination of moisture content of transformer oil during operation (Coulomb method).
ASTM D4928-00 (2010) Karl Fischer Coulometric Titration for Determination of Water Content in Crude Oil.
ASTM D6304-2007 Karl Fischer Coulometric Titration for Determination of Water Content in Petroleum Products, Lubricating Oils and Additives.
ISO 10337-1997 Determination of moisture content of crude oils Karl Fischer Coulometric titration.
GB/T 11146-2009 Determination of crude oil water content Karl Fischer Coulometric titration.
GB/T 3727-2003 Determination of trace water in ethylene and propylene for industrial use.
GB/T 5074-1985 Microcoulometric method for determination of moisture content of coking products.
GB/T 6023-2008 Determination of trace water in industrial butadiene Karl Fischer Coulometric.
GB/T 7376-2008 Determination of trace moisture in industrial fluoroalkanes - Karl Fischer method.
GB/T 18619.1-2002 Determination of water content in natural gas - Karl Fischer Coulomb method.
GB/T 18826-2002 Industrial 1,1,1,2-tetrafluoroethane HFC-134a.
SH/T 0246-1992 Determination of water content in light petroleum products (electricity method).
SH/T 0255-1992 Additives and additives containing lubricants - Determination of moisture (electricity method).
ASTM E1064-2008 Karl Fischer Coulometric Titration for Determination of Water Content in Organic Liquids.
ASTM D4928-00 (2010) Karl Fischer Coulometric Titration for Determination of Water Content in Crude Oil.
ASTM D6304-2007 Karl Fischer Coulometric Titration for the determination of water content in petroleum products, lubricants and additives.
Technical Parameters:
Method of Display | 240X128 lattice touch screen LCD with English display |
Method of Testing | MPU controlled electrolysis(Karl Fischer Coulometric Method) |
Rate of Electrolysis | 2.4 mgH2O/min |
Electrolysis Current | Auto-control within 430mA |
Testing Range | 0.01ugH2O-200mgH2O |
Water Content Range | 0.0001%（1ppm）—100% |
Sensitivity | 0.01ugH2O |
Accuracy | Water Content: 1ugH2O-1000ugH2O; Deviations≤±3ug, Water Content: ＞1000ugH2O; Deviations≤±0.2% (excluding deviations of sample injection) |
Drift Compensation | Auto-control via MPU |
Stirring Speed | Adjustable and steerable |
End-point Indication | LCD display /output via printing / voice warning / end-point indication light |
Data Input | Input via touch screen |
Sample Number | Numbered by users |
Calendar/Clock | automatic display and print analyzing time and date |
Self-checking | Breakdown self-checking |
Special Function | Work independently or connected with laptop or other computers |
Power Consumption | ＜40W |
Dimension | 360×310×135mm |
Working Environment | Temperature: 5℃-40℃, Humidity: ＜85% |
Power Supply | AC220V±10% 50HZ±2.5HZ |
Weight | About 6kg |
Standard wooden box with foam layer inside
