The liquid phase corrosion tester is designed and manufactured according to GB/T 11143-2008 "test method for the anti-rust performance of mineral oil in the presence of water", mainly for the determination of mineral oil and lubricating oil with inhibitor, especially for turbine oil mixed with water.
The liquid phase corrosion tester is designed and manufactured according to GB/T 11143-2008 "test method for the anti-rust performance of mineral oil in the presence of water", mainly for the determination of mineral oil and lubricating oil with inhibitor, especially for turbine oil mixed with water. Determination of the rust resistance of metal parts during mixing to assess the rust resistance of the additive. This instrument is also suitable for other oils such as hydraulic oil, circulating oil and liquids heavier than water.
Instrument features:
1 LCD screen interface, menu prompt input, timely display of temperature, time, parameters and other working conditions;
2 Using single-chip intelligent temperature control, temperature control accuracy ± 0.1 ° C;
3 Class A PT100 temperature sensor with high temperature control accuracy and good stability;
4 The instrument can be set to 1-4 test holes for mixing and control time respectively;
5 Heating, bathtub and other components are made of stainless steel, resistant to corrosion, durable and easy to observe;
6 The stirring device adopts permanent magnet motor, which has stable speed, low noise and small volume.
Technical indicators:
Display mode: LCD display
Temperature control range: room temperature to 100 ° C
Temperature control accuracy: ±0.1 °C
Temperature sensor: industrial platinum resistance, indexing number Pt100
Control time range: 1 minute to 99 hours arbitrary setting
Stirring motor speed: 1400r/min
Sample stirring speed: 1000±50r/min
Sample hole: 4
Power source: AC 220V ± 10%
Frequency: 50Hz ± 5%
Applicable ambient temperature: recommended room temperature ~ 45 ° C
Applicable ambient humidity: ≤85%
Dimensions: 500mm × 330mm × 750mm
Weight: about 25 kg