The liquid phase corrosion testing equipment is designed and manufactured according to GB/T 11143-2008 "test method for the anti-rust performance of mineral oil in the presence of water". It mainly measures the mineral oil and lubricating oil with inhibitor, especially the turbine oil when mixed with water.
The liquid phase corrosion testing equipment is designed and manufactured according to GB/T 11143-2008 "test method for the anti-rust performance of mineral oil in the presence of water". It mainly measures the mineral oil and lubricating oil with inhibitor, especially the turbine oil when mixed with water. The anti-rust ability of metal parts is measured during mixing to evaluate the anti-rust ability of the additive. This instrument is also applicable to other oils such as hydraulic oil, circulating oil and liquid heavier than water.
Instrument features:
1. Using temperature controller for intelligent temperature control, temperature control accuracy ± 0.1 ° C;
2. Class A PT100 temperature sensor with high temperature control accuracy and good stability;
3. The instrument can be set to 1-4 test holes for agitation test;
4. Heating, bathtub and other components are made of stainless steel, resistant to corrosion, durable and easy to observe;
5. The stirring device adopts permanent magnet motor with stable speed, low noise and small volume.
Technical indicators:
Display mode: highlight digital tube display
Temperature control range: room temperature to 100 ° C
Temperature control accuracy: ±0.1 °C
Temperature sensor: industrial platinum resistance, indexing number Pt100
Control time range: 1 minute to 99 hours arbitrary setting
Stirring motor speed: 1400r/min
Sample stirring speed: 1000±50r/min
Sample hole: 4
Power source: AC 220V ± 10%
Frequency: 50Hz ± 5%
Applicable ambient temperature: recommended room temperature ~ 45 ° C
Applicable ambient humidity: ≤85%
Dimensions: 500mm × 330mm × 750mm
Weight: about 25 kg