This XRF Spectroscopy sulphur content analyzer is green and environmentally friendly, adopts the principle of energy dispersion, mechatronics design, fast analysis speed, repeatability, reproducibility are in line with the relevant requirements of the national standard GB/T 17040 and GB/T 11140. It can be used to detect sulfur content in crude oil or petrochemical production.
X-ray Fluorescence XRF Spectroscopy Sulphur Analyzer
This XRF Spectroscopy sulphur content analyzer is green and environmentally friendly, adopts the principle of energy dispersion, mechatronics design, fast analysis speed, repeatability, reproducibility are in line with the relevant requirements of the national standard GB/T 17040 and GB/T 11140. It can be used to detect sulfur content in crude oil or petrochemical production.
Technical features:
1. Mechatronics microcomputer design, 8-inch wide-angle capacitive touch screen (1027x768) display, backlight brightness can be set through the software, without keyboard, the interface is simple and beautiful.
2. Wide variety, wide measurement range, fast analysis speed and low consumption of standard samples.
3. The fluorescence intensity ratio analysis method, temperature, pressure automatic correction, carbon-hydrogen ratio (C / H) can also be modified.
4. The automatic diagnosis function of the instrument, judging the working state and electrical parameters of the instrument.
5. Adopt disposable Mylar membrane sample cup, can avoid cross-contamination, sample cup is made with multi-function pressing parts, quick and convenient.
6. The sample table has the advantages of accurate positioning, convenient placing of samples and replacement of leak-proof parts, and avoiding the possibility of contamination of the detection system.
7. Instrument data is stored in large amount by default, 4096 content analysis results and 8192 counting measurement data are stored by default, 16 instrument calibration results data can be queried, or uploaded to the computer through RS-232 standard serial communication port.
8. It has the function of automatic peak stabilization. When the detector performance drops, the system can adjust the high pressure automatically and correct the error.
9. By default, the working curve is selected automatically without user intervention.
10. The user can choose the unit of measurement results, ppm or (mxm) %.
11. Safe radiation protection measures, no harm to individuals and groups of ionizing radiation.
Application Area:
Crude oil, petroleum, heavy oil, diesel oil, kerosene, gasoline, naphtha. Total sulfur content in oil products;
Total sulfur content in coal chemical products, such as primary benzene;
Total sulfur or sulfide content in solid fine powder samples, such as anode carbon block, petroleum coke, modified asphalt and other carbon materials;
Determination of total sulfur or sulfide content in lubricating oils, petroleum additives; Measurement of total sulfur or sulfide content in other liquids.
Main technical indicators:
1. Sulphur measurement range: 7 ppm / 6%
2. Precision: a repeatability (r): < 0.02894 (X 0.1691)
3. B reproducibility (R): < 0.1215 (X 0.05555)
4. Sample size: 3ml (equivalent sample depth 3mm~4mm)
5. Measurement time: 30、60、90、120、150 seconds arbitrary setting
6. Automatic measurement of single sample, measurement times: 1, 2, 3, 5, 10 arbitrary settings, mean value and standard deviation given at the end of the measurement.
7. The instrument can store 10 calibration curves.
8. Operating conditions: temperature 5, 35 ℃, relative humidity ≤ 85% (30 ℃ ), power supply AC 220V ≥ 20V, 50Hz rated power 50W
9. Size and weight: 460 mm, 260 mm, 260 mm (long, wide and high) 11 kg.